Search the forum,

Discuss Wet/electric ufh and radiator manifolds) in Southeast London in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
7
As part of deep house renovation, planning to install wet ufh on the ground floor, and radiators on upper floor.

Two bathrooms will have both water based towel warmers and electric ufh, and need dual thermostat to separately control air temp (by running towel warmer) and floor temp.

Need manifold system for radiators and consistent controls (same type thermostats controlling room temperature irrespective of the type of heater - ufh or radiator - used). Thermostats need to be 'smart' - integratable with Alexa/Google.

There is another contractor installing a VRF system (ASHP) that will provide a buffer tank and flow/return pipes for the heating system.

Any takers?
 

Reply to Wet/electric ufh and radiator manifolds) in Southeast London in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I am doing heavy house renovation and want to have ufh (multizone) at the ground floor and radiators on upper floors. I want to have consistent controls, with manifolds feeding both the ufh loops and radiators, and the same type thermostats controlling both (depending on the room, the...
Replies
3
Views
949
Hi Everyone I wasn’t sure whether to post this in here or UFH but hopefully I’m posting this in the correct group. I’m in the throes of a full renovation and am currently designing the central heating system, I’m installing radiators (11 or 12 in total) and am going to run each rad from its...
Replies
7
Views
735
Good morning, wondered if anyone can advise please on a resolution? My set up at home is that I have a 4-bed detached with 21 radiators (includes 4 towel rails), a 6m x 4m orangery/conservatory that was built last year with under-floor heating, and a Megaflo for storing hot water. The UFH...
Replies
61
Views
5K
Hi, we had UFH installed dowstairs in our house recently, and I'm not 100% sure that it's connected correctly. I'd be grateful if someone could have a look at the diagrams and tell me if what the plumber did makes sense. The house is heated with an A2W Samsung/Joule heatpump. The buffer...
Replies
7
Views
1K
I am looking to have electric ufh and water based towel warmer in a bathroom, and want to control both the air temperature and floor temperature using a dual thermostat. So the thermostat would have built-in temperature sensor which will be used to control the valve of the towel warmer (it will...
Replies
0
Views
604
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock