Search the forum,

Discuss Valve Manufacturer and dis-assembly in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
2
Dear all

After moving home recentely im now in a house with a warm to say the least shower. All the hot water taps in the house give very hot water at maximum so im presuming a valve issue.

So i can research it further, i.e. removing to see if hot can be increased/ possible replacement, im struggling to identify it, see below. Any help on type or and fault diagnosis would be great. i havent yet worked out how to take the knobs off in the absence of any screws. Thanks in advance

20201014_165340 (1).jpg
 
Maybe a trevi valve

the Dome should come off / unscrew
 

Reply to Valve Manufacturer and dis-assembly in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock