Valve identification

[2005jasp]

Afternoon all, just try in identify thus valve, circa early 2000's. Bought a replacement from Toolstation to do a quick change. I wanted to keep the nut and olive on the 10mm pipe and replace the leaking body of the valve. The threads were different!!

 

[exedon2]

Afraid to say normal for 10 mm compression fittings hardly 2 manufacturers the same
If you can get nut below olive easiest solution is to carefully use a junior hacksaw and cut old olive off. Cut at 45 degrees when nearly thro use thin bladed screwdriver to snap olive.

 

[cjg]

or use a pair of pump pliers and carefully twist the olive off.

 

[ShaunCorbs]

Is the gland nut leaking under the white plastic cap ?