Search the forum,

Vaillant diverter valve

Discuss Vaillant diverter valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
A

Archy Styrigg

Alright lads.

Vaillant Turbomax 828-E.

Before I end up with no hot water and heating when I start taking my boiler apart, is the valve serviceable or do I just get a new one? :)


Cheers.
 
If your not gas safe you shouldn't be taking anything apart.
 
Archy Styrigg said:
Alright lads.

Vaillant Turbomax 828-E.

Before I end up with no hot water and heating when I start taking my boiler apart, is the valve serviceable or do I just get a new one? :)


Cheers.
Click to expand...
Alright lads! I'm a proper boyo; look at my casual language! I know loads of tradesmen, I may even be one myself; probably a plasterer or if heaven provides, an electrician! I'm going to be all casual about this but really I just want to make it look like I have the faintest idea but actually the gas safe training involves a great deal of work and a regulation book 2-inches thick BUT

So it's ok if I potentially kill my family because it's just the water side right?

No, Archy. You're a :nono: idiot. Get an engineer in.
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to Vaillant diverter valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

N
Towel Rail Valve Advice please (35 Characters needed.)
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
155
Timmy D
T
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
1
Views
75
Gasmk1
Gasmk1
M
heatrae sadia 25l 9004010.
Has anyone one fit or serviced one of these before; Heatrae Sadia 25l 9004010. It a 25 litre hot water storage cylinder.
2
Replies
39
Views
626
John.g
J
F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
4
Views
365
Timmy D
T
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
89
fowlerboi
F
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock