Search the forum,

Discuss Unvented hot water tank noisy filling sound in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
5
My Unvented hot water tank makes a noisy filling sound when the hot water and heating come on. Any ideas on how to stop it??
It's had a new expansion tank and prv recently.
 
What brand of unvented unit is it?
Also how old is it and was it always making the noise?
You need to use a G3 unvented qualified plumber to work on the unit.
Some had a problem with flow noise which can be corrected
 
As Riley said, needs serviced once a year to keep long warranty of unit and to keep it all working properly and safe.
Just inform service person, or contact manufacturer
 
Yes. So 2 yrs ago my old tank blew and emptied into the room below. Bought a new tank, the plumber next door fitted it for us, but didn't fit the expansion tank that came with it. I noticed that water was coming out of the pipe outside. Bought a new prv as that was what was recommended. Water was still coming out a little, and a plumber told me to check the expansion tank. It was full of water, so i fitted the new one that came with the new tank, but still getting the filling noise.
 
Ok so you are working illegally on what can be a very dangerous appliance. You need to be G3 qualified. Your “plumber” is clearly incompetent if he’s not installed the correct expansion vessel and is also breaking all sorts of rules if he’s not qualified. Please turn off the install and get a professionally qualified person in to check the install over for you
 
It’s your safety. Seriously. These things are literally bombs if not installed properly. Please watch
 

Reply to Unvented hot water tank noisy filling sound in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
255
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
168
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
207
My son has an apprenticeship interview for to become a plumber and heating engineer. The have said there will be a multiple choice exam for this for suitability. The thing is my son panics during tests/exams. Is there any book I can buy him to practice the multiple choice test for the exam? What...
Replies
3
Views
356
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
115
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock