Search the forum,

Discuss under pressure swivel tee for gas in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

Pigzy2012

I have 3 of these, brand new are they worth anything, and can i sell them on?? Primofit pe sdr 11 x rs,

looking forward to some advise,

thanks.
luke.
 
Hi, here is a pic of one of the tee's and also i have three of these not sure if they are to be used in conjunction with the tee's?? photo 1.JPGphoto 2.JPG
 
Your first pic is part of a tap tee missing the saddle.
Your second pic is a crimped PE ECV gas connection.
No good to anyone as you shouldn't be touching either.
 
hi I have the same as pic 1 but all in packaging have about 20 could you price them please??
 
2 bob.

Bin them as they are for use by specialist contractors only and no use to rgi's.
 
Status
Not open for further replies.

Reply to under pressure swivel tee for gas in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have been facing central heating low pressure on unvented hot water RM Cylinders but can't see any leak on the PRV, expansion vessels and plasterboard celling. I have got unvented pressurized RM Cylinders hot water system with 27KW Worchester gas boiler with expansion vessels . When...
Replies
2
Views
453
losing pressure
L
Some advice needed please re a 3 year old combi gas boiler. The hot water works but no heating. A gas engineer was already booked to do the annual safety check before the fault developed. He said the boiler is ok with no fault. He said there must be a leak under the floor boards causing hot...
Replies
3
Views
396
Hello, I need some help. Problem: my jet pump fluctuates between 15-35psi and will not build any pressure higher than that. There is a swooshing or surging sound that continually occurs. Location: it pulls water from a lake to supply the house. Lift is 40ft distance from foot valve to pump...
Replies
0
Views
457
Low hot water pressure Hi everyone, I'm hoping someone is able to shed some light on my situation before I have to call out the professionals. We've been in our house for over 3 years now, when we moved in the hot water pressure was pretty good (confirmed by a retired plumber family friend)...
Replies
5
Views
588
I have an Ariston combi e on lpg, the gas pressure drops from a lovely 37mb to 0 the second gas valve opens and fan starts to run, usually would drop to around 35mb on comparable systems. Any ideas what could cause that? I suspected a blockage in the regulator so changed that and attached the...
Replies
13
Views
985
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock