Search the forum,

Discuss UK Tiling Forum - they proper hate us don't they? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

leelister6

Esteemed
Plumber
Gas Engineer
Messages
967
Been looking at the tilers forum UK Tiling Forum as I've been getting quite a few refurbs and can't find a decent tiler so been doing it myself. Got some good gear and although I'm not particularly quick, I do a good job.
Some of the blokes on there really have got a bee in the bonnet about plumbers though! Is it cos plumbers can tile but tilers can't plumb?!
 
Last edited by a moderator:
Yep
 
Dont tilers hate everybody?? I do like their "new tools Tuesday's" on tilers forum but try not to let them know that. :)
 
Been looking at the tilers forum as I've been getting quite a few refurbs and can't find a decent tiler so been doing it myself. Got some good gear and although I'm not particularly quick, I do a good job.
Some of the blokes on there really have got a bee in the bonnet about plumbers though! Is it cos plumbers can tile but tilers can't plumb?!
Why look at the tilers forum ?
There is nothing to be learned , they put muck on a wall stick things on the muck and always go home early when it’s site work huh centralheatking
 
They might be thick but decorators painting of any exposed valves, is I believe a deliberate and spiteful act. They can't be that thick can they???
 

Reply to UK Tiling Forum - they proper hate us don't they? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
0
Views
49
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
165
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
297
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
348
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock