• Welcome to PlumbersForums.net - The international free plumbing advice forum. Professional plumbers sharing advice with fellow plumbers and DIY alike. Register for free today! - Checkout the Plumbing Advice forum and then our Plumbing Videos area which still needs populating.

Discuss Testing concealed shower valve in the DIY Plumbing Forum area at PlumbersForums.net

kristeva

Messages
22
Hi all

I've finished running the copper for my concealed shower valve and tested both inlets and the outlet with cold mains (full pressure).

I just wanted to ask is it considered necessary to test the hot inlet with hot water, or will the cold suffice?

Many thanks

P
 

Reply to Testing concealed shower valve in the DIY Plumbing Forum area at PlumbersForums.net

Similar threads

Evapourized
If you had a vented cyclinder and cold water tank in the loft, with a proven low pressure/flow house mains feed. An unvented cylinder will not...
Replies
6
Views
349
Timmy D
T
M
The 0.1 bar pressure stated is working pressure at shower inlets, which means 1m head of standing pressure minus any losses due to frictional...
Replies
1
Views
320
Ric2013
R
Sunnee
Hi Ben, you need a croswater cp250 thermostat cartridge matey, also might be worth gett8ng a pair of crosswater non return valves too as these are...
Replies
4
Views
421
Lunchbox171
L
Bazza1687
With hot tap open, if you turn the shower to fully hot does the temperature increase, if not, does it increase if you reduce its flowrate while...
Replies
6
Views
752
John.g
J
ridgerunner
Replies
5
Views
378
ridgerunner
ridgerunner
Creating content since 2001. Untold Media is a Registered Trademark.

Newest Threads (Please Reply)

Search Forum

Top