Search the forum,

Discuss Tap identification needed... in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,172
Morning. Have some bath taps which I am struggling to get cartridges for. Anyone recognise them? The cartridges are about 28mm wide?

Cheers
 

Attachments

  • 20230421_150109.jpg
    20230421_150109.jpg
    538.1 KB · Views: 28
  • 20230224_132542.jpg
    20230224_132542.jpg
    247.4 KB · Views: 23
It’s a ideal standard monolux

does that look like the cartridge

Awesome. Thank you shaun. You have made life easy now.
 
It’s a ideal standard monolux

does that look like the cartridge

It does look like the cartridge. Out of stock. Look like £80. Wow
 

Reply to Tap identification needed... in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed. Is there a seal behind the body? Thanks.
Replies
2
Views
289
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
229
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
300
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
0
Views
53
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
207
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock