Search the forum,

Discuss Tap Conversion needed in the DIY Plumbing Forum area at PlumbersForums.net

Messages
2
Hi,
I have a 2 in 1 laundry tap as pictured in the attachment.
I would like to convert it into a standard single tap fitting.
Please advise on how to do this.
 

Attachments

  • special tap.jpg
    special tap.jpg
    30 KB · Views: 9
Can you show us a picture of the tap or fitting you wish to replace, in situe, or where you intend to fit one? I'll be honest and say that I don't really understand your question so if we could see a picture of where you want to put the tap I might understand a little better.

Thanks.
 
That tap goes into an existing valve body, so you will have 2 outlets off the same body if you install that tap.
Hence, the 2 handles.

If you want the existing tap to do a washing machine or dishwasher (20mm hose connection) - go buy a washing machine stop tap.
If you want it to connect to a tap (15mm connection ) - go buy a mini stop tap.

There is no descent way of connecting that tap to 1 outlet, unless you cap off one outlet
 

Reply to Tap Conversion needed in the DIY Plumbing Forum area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock