Search the forum,

Discuss Taking the Operating pressure in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
8
Hi,
When carrying out operating pressure on a boiler and there is a gas cooker connected do you just light 3 hobs or do you need to light the oven as well.

Many thanks
 
Light everything and check you are not getting more than xmb drop between meter an each appliance
 
Last edited:
Light everything and check you are not getting more than X drop between ............................................
To much info being given out on an open public forum in my mind.
Other forums have already declined to answer this today.
 
To much info being given out on an open public forum in my mind.
Other forums have already declined to answer this today.

Yep thats why I left it a short answer at 3 rings , not really giving any info out to compromise any gas safety
 
  • Agree
Reactions: rpm
Agree op please pm your gas safety number or if your in training etc
 
Gas man in training so be gentle :D opened the post back up until we hopefully get a training section
 
Status
Not open for further replies.

Reply to Taking the Operating pressure in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
236
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
233
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
4
Views
388
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
159
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
181
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock