Search the forum,

Discuss Surface mounted Electrical socket in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
22
Hi,
If you have one of the above, less than 150mm from a gas pipe is that just an advisory warning notice and tell the customer that they should get it moved by a qualified electrician?
Also if there is no bonding within 600mm of the meter outlet the same job, would you just add this to the warning notice or do both infringements make it AR ?
 
25mm for sockets / wire so that’s fine

150 is the mains incoming eg 60-100amps

No bonding ncs
 
25mm for sockets / wire so that’s fine
its actually less than 25mm, socket is actually more or less touching the pipe.
IMG_2667.jpg
 
Get them to move the socket a bit but still only ncs
 
NCS only. Several NCS does not equal AR. That has only ever applied to flue faults. TBH, off the top off my head, I am not sure if it still applies. Will have to thnk about it.
 

Reply to Surface mounted Electrical socket in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

E
Good evening everyone :), I’ve recently moved into a new flat that is completely electric (It’s got a dual immersion heater) and just had a smart meter installed. The dual immersion heater and has two separate switches - one is labelled top. I’ve had them both on since moving in but just seen...
Replies
3
Views
1K
Evening all, not sure if I should be asking sparkies ? I have a qualified and experienced gas fitter installing a new system in a small rural cottage. I am having a friendly discussion about the location of heated towel rad. You open the door to the bathroom and to one side is the...
Replies
10
Views
1K
Well, this is a new one on me. Has anyone got any thoughts on the following? I completed a bathroom job and invoiced for the last portion of labour earlier this week. They had expressed how delighted they were with the finished article and that it was a lovely job. Fast forward to a my first...
Replies
15
Views
3K
Hello. As stated above my saunier duval themaclassic f30e isn’t firing up and is giving an F1 fault code. I’ve taken the front off and opened up the housing where the elements and the spark are and given it all a clean to get rid of any corrosion. It has no problem sparking and there are no...
Replies
4
Views
1K
A domestic Gas Standard pre-payment Meter was exchanged for a Gas Smart Meter (SM) and then connected back to the pre-existing pliable/semi-rigid/anaconda connectors. I believe this is illegal and breaks laws and regulations when this was done on 30 March 2017. But my Utility company who had the...
Replies
8
Views
12K
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock