Search the forum,

Discuss Sunday afternoon teaser in the USA area at PlumbersForums.net

king of pipes

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,157
A little brain teaser for you chaps had a call yesterday my boilers not working ? see if you can spot what I found
 

Attachments

  • PXL_20210918_092441687.jpg
    PXL_20210918_092441687.jpg
    393.5 KB · Views: 60
  • PXL_20210918_092453334.jpg
    PXL_20210918_092453334.jpg
    284.3 KB · Views: 53
  • PXL_20210918_092432514.jpg
    PXL_20210918_092432514.jpg
    410.5 KB · Views: 52
Dead little mouse
 
Mouse powered boiler?

All the surface mount components look intact. Looks perhaps like one wire completely missing? as well as several damaged.

Interesting how repairable it might be considered to be, and who would want to attempt that. Need a quick way to tell if the circuit boards might be damaged before spending too long on it. I'm totally non qualified but I'd want to check the chassis earth all present and correct just as a first step. So interesting to me as a rank amateur (I wouldn't go near a boiler or gas) how much electrical training a gas engineer gets (and acquires).

Roy
 
Yes correct guys had a furry visitor no evidence of him other than the chewing and poop 🤣🤣 PCB is shorted out black and scorched on the back £207 for a board no choice but to go for it .
 
A Proper boiler how often do you get to work on one of these and look at the ratio 😁
 

Attachments

  • Screenshot_20210919-162612.png
    Screenshot_20210919-162612.png
    1.4 MB · Views: 43
  • Screenshot_20210919-162558.png
    Screenshot_20210919-162558.png
    2.2 MB · Views: 41
  • Screenshot_20210919-162554.png
    Screenshot_20210919-162554.png
    1.6 MB · Views: 31
  • Screenshot_20210919-162547.png
    Screenshot_20210919-162547.png
    1.4 MB · Views: 27
  • Screenshot_20210919-162541.png
    Screenshot_20210919-162541.png
    2 MB · Views: 25
  • Screenshot_20210919-162535.png
    Screenshot_20210919-162535.png
    2.1 MB · Views: 27
  • Screenshot_20210919-162531.png
    Screenshot_20210919-162531.png
    2.3 MB · Views: 27
  • Screenshot_20210919-162522.png
    Screenshot_20210919-162522.png
    1.8 MB · Views: 22
  • Screenshot_20210919-162516.png
    Screenshot_20210919-162516.png
    1.7 MB · Views: 26
  • Screenshot_20210919-162511.png
    Screenshot_20210919-162511.png
    1.6 MB · Views: 32
Yes bud do it every year pictures are from a 2019 full strip down clean and service gets done like that every 3 years , and a interim clean and check in between , was booked to remove old shower doors and fit new ones there yesterday when I got the call "I've no hot water"a new PCB is on order and few wiring repairs and 🤞 hope she comes back to life 😉
 
Nice to see someone who can actually be bothered to treat an old boiler with some respect rather than just give it short shrift because it's old anyway.
 
Last edited:
0.0001 is the flue gas co/co2 ratio it tells us how well the boiler is burning, the lower the reading the better the combustion, less carbon monoxide is produced and put into the atmosphere 6ppm is very low for a old boiler and goes to show what can be achieved . Kop
 
Update fellas new PCB and set of electrodes and a bit of wiring replaced and she's back up and running new door and frame on order 😉👍. Kop
 

Attachments

  • PXL_20210922_083720930.jpg
    PXL_20210922_083720930.jpg
    278.6 KB · Views: 13
  • PXL_20210922_083644877.jpg
    PXL_20210922_083644877.jpg
    412.1 KB · Views: 17

Reply to Sunday afternoon teaser in the USA area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
228
My son has an apprenticeship interview for to become a plumber and heating engineer. The have said there will be a multiple choice exam for this for suitability. The thing is my son panics during tests/exams. Is there any book I can buy him to practice the multiple choice test for the exam? What...
Replies
3
Views
260
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
192
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
2
Views
135
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
102
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock