Search the forum,

Discuss Sub contract vs employed (newly qualified) in the Gas Engineers Forum area at PlumbersForums.net

Messages
22
Hi

I've recently qualified as a gas engineer , for the time i was training at the college , i was working as a apprentice for about 6 months. For these 6 months i was assisting on many types of jobs including basic plumbing jobs like gas runs, taps and toilet installs but majority focused on boiler breakdowns and installs. I wanted to know would it be best for me to go employed and gain experience because i'm very new. If you recommend so , can you tell which companys/firms are best to work for from previous experience. I have also been given a option to subcontract with a company who offer basic gas services, gas certs and breakdowns but all expenses such as fuel etc will be on me. So i'm kind of confused. Just to reinstate i am new but have basic experience with working with boilers, so please give me the best advice.

thanks
 
The problem you wil have on gas breakdowns its lack of knowledge and no-one you can turn to for help.
You need to be employed and have the support of others more experienced.
 
The problem you wil have on gas breakdowns its lack of knowledge and no-one you can turn to for help.
You need to be employed and have the support of others more experienced.
I agree, it will be a hard slog going out by yourself at this stage.

Get some experience with a safety net behind you and then in the future you can go alone.

Where in London are you?
 
Try to think about what type of work you want to be doing five/ten years down the line (domestic / commercial, plumbing / heating / gas, renewables, etc.) and try and get employment that will give you experience and further training in that area. If it's an area where self-employment is viable then aim to pick up some basic business skills (marketing, finance / accounts, planning, etc.) along the way.
 
Hi chuck,

Thanks for the reply, sorry i didn't mention what i was looking to do down the line. I'm aiming to become self-employed , working in domestic then moving to commercial. Due to my age factor; I'm 20 and by the looks of gas coming to a end by 2026, it doesn't necessarily mean all gas works will come to a end due the existing installations etc etc . This means I will still work with gas but want to move on renewable energy. This primarily why i want to work for boiler manufactures e.g. baxi , since they are working on renewable which will essentially give me a head start.
 
Hi chuck,

Thanks for the reply, sorry i didn't mention what i was looking to do down the line. I'm aiming to become self-employed , working in domestic then moving to commercial. Due to my age factor; I'm 20 and by the looks of gas coming to a end by 2026, it doesn't necessarily mean all gas works will come to a end due the existing installations etc etc . This means I will still work with gas but want to move on renewable energy. This primarily why i want to work for boiler manufactures e.g. baxi , since they are working on renewable which will essentially give me a head start.

There will still be gas boilers installed after 2026, we’re no where near the stage that we can stop using gas.

You’re 20 years old. You’ve no need to rush to self employed. The gains you can make at your age working with experienced people are huge, as the experience will last your whole working career.

I had an apprentice that came to me after a quick gas college gas course. He was qualified to fit a boiler but knew Damn all about anything else.

Didn’t have a good understanding about heating/domestic water systems. Couldn’t fault find a broken pump/zone valve/vented system etc.

There is so much more to the gas ‘industry’, than gas. The gas part is tiny.

Not to Rubbish on your current achievement/s (you’ve done great to get qualified at your age, it shows you have the potential to be great), but with your current experience level, you’d likely fail at efficiently fault finding 80%+ boiler/heating system breakdowns.

I can see you want to learn as you’re asking for advice, so don’t take my words to heart and stop to progressing. I reckon you need a minimum of a year experience (and that’s pushing it, ideally 3), before going by yourself.
 
My advice is not to chase the money. At your age and experience level support is invaluable. Working under more experienced engineers may feel like your being held back but that experience will be invaluable later on.
 
There will still be gas boilers installed after 2026, we’re no where near the stage that we can stop using gas.

You’re 20 years old. You’ve no need to rush to self employed. The gains you can make at your age working with experienced people are huge, as the experience will last your whole working career.

I had an apprentice that came to me after a quick gas college gas course. He was qualified to fit a boiler but knew Damn all about anything else.

Didn’t have a good understanding about heating/domestic water systems. Couldn’t fault find a broken pump/zone valve/vented system etc.

There is so much more to the gas ‘industry’, than gas. The gas part is tiny.

Not to Rubbish on your current achievement/s (you’ve done great to get qualified at your age, it shows you have the potential to be great), but with your current experience level, you’d likely fail at efficiently fault finding 80%+ boiler/heating system breakdowns.

I can see you want to learn as you’re asking for advice, so don’t take my words to heart and stop to progressing. I reckon you need a minimum of a year experience (and that’s pushing it, ideally 3), before going by yourself.
My advice is not to chase the money. At your age and experience level support is invaluable. Working under more experienced engineers may feel like your being held back but that experience will be invaluable later on.
Thanks for the reply guys

I agree 100% there is a great deal to learn and to pick up because i'm really unexperienced. But The only tradesman or person i can go with at the moment has only been qualified for 2 years. The jobs he comes across i diagnose alongside with him so as funny as it sounds i learn only when he comes across something new aswell. There is another man i could go work as a apprentice but he just does installs.
 

Reply to Sub contract vs employed (newly qualified) in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
4
Views
388
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
236
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
308
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
177
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock