Search the forum,

Discuss Starting plumbing at age 56 ?? in the USA area at PlumbersForums.net

Messages
2
I know the age is an issue, due the corona virus i made redundant,
i am looking to change career to plumbing or electrician .Its it too late for those trade to learn and make the living at age 56.
I really appropriate you advice.
Many Thanks
 
Both Plumbing and Electrical are hard on the knees.

What experience of working on the tools and working in customer's homes and premises do you have?
Have you run any business before as self employed?
I doubt you'll get employment as by the time you're qualified with any experience you'll be very close to 60.
So self employment would be the only way.

You're going to be in competition with thousands of people of a far younger age who are currently being made redundant / unemployed and will see Electrical and Plumbing as a future.
 
Let's assume you have some aptitude for it, by the time you get full qualified say as a GSR or NICEIC I doubt it'll be worth it. You might as well start doing a trade with less responsibility and agro like tiling, do a short course and you could up earning as much if you're decent.
 
I would be looking at Shopping delivery driver tbh
 
Hi Ryan,

Can you say what jobs and skills you have done to date, also what your level of fitness is. Others can then perhaps suggest some jobs (see also replies above). Also how quick do you need to be earning.

Cheers,

Roy
 
I'm a spark and it seems the CPS's now require the 2391 for entry to their schemes.

Starting from nothing, gaining the exams and knowledge and hands on experience could be tough - then the work isn't easy and there are many people pricing "foolishly" then leaving clients in the lurch. Anybody can be a POOR busy fool

You don't say where you are but I would recommend you do google searches for each profession and see how many there are around you............
 
I'm in the same boat. I'm 36! I done a level 2 plumbing, but no one takes you on with little experience. I'm good on the tools, what's stopped me is there's a lot I don't know. I would like to learn, anyone here want to give me a chance on the field.

William.
 
I'm in the same boat. I'm 36! I done a level 2 plumbing, but no one takes you on with little experience. I'm good on the tools, what's stopped me is there's a lot I don't know. I would like to learn, anyone here want to give me a chance on the field.

William.
Can you get work on new housing estates just to get started ? Ok perhaps only doing simple stuff to start with, and you will need the right site safety quals. Do you want to get more qualifications at same time as first job in order to move on e.g. to pressurised stuff, and gas ?

Cheers,

Roy
 
I really appropriate you advice.
Starting with a clean sheet always seems attractive in a 'grass looks greener over that side of the fence' sort of way. But qualifying as an electrician / plumber is a big investment of time and money and I don't know about money but at 56 TBH you are short of time and you'll be lucky to break even on the investment.

For many people the best thing to do is not to move too far from what they've been doing previously. Perhaps take a short course to develop a new skill or build on your existing ones to fill in time while job hunting / waiting for the economy to pick up again.

There seem to be a lot of government sponsored courses available at the moment. Maybe see it any of those fit the bill:

 
Can you get work on new housing estates just to get started ? Ok perhaps only doing simple stuff to start with, and you will need the right site safety quals. Do you want to get more qualifications at same time as first job in order to move on e.g. to pressurised stuff, and gas ?

Cheers,

Hi Roy I didn't think of that, maby it's worth popping into a new build site. And asking if I could do the second fix. It's worth a try.
Thanks for your time.
 
I'm in the same boat. I'm 36! I done a level 2 plumbing, but no one takes you on with little experience. I'm good on the tools, what's stopped me is there's a lot I don't know. I would like to learn, anyone here want to give me a chance on the field.

William.
Self emp. JFDI William. There's always more to learn. Good luck.
 
If I were you Ryan I'd look at specialising in only one or two types of plumbing installations instead of trying to learn about everything. Being an electrician you're already half way there to advertise yourself as an electric shower installer and instant water heater installer.

Start with the above and you'll be on your way in no time.
 

Reply to Starting plumbing at age 56 ?? in the USA area at PlumbersForums.net

Similar plumbing topics

    • Like
Another newbie in the forums. I’m a 33 year old and after having worked in the Graphic/Web Design industry for around 8 years, I worked a few positions, did a bit of freelance and was continually working late hours and evenings unpaid as well as every weekend. I ended up getting burnout and...
Replies
1
Views
290
Hello We recently had a bathroom referb with a new sink and vanity unit that contained all new plumbing for it. The sink doesn't have an overflow and is draining really really slowly as I understand that there needs to be an air vent in the trap etc.. I know that this is pretty basic but know...
Replies
2
Views
273
M
Hi all, I am 38 years old and have spent the last 15 years of my working life as an accountant. I have recently been made redundant so have a fair bit of money but don't want to continue my career in finance. Hence why I am here :) I have no qualifications in the "trades" or real practical...
Replies
4
Views
988
Hello all, first time poster so if there is any additional information I can provide that may help, please let me know. Our kitchen mixer tap has been intermittently dripping from the hot tap, and the cold tap is squeaking when you turn it. Possibly two different issues, possibly related? The...
Replies
3
Views
445
    • Optimistic
I am renovating a house, which currently has no plumbing. Attached is the design for the house. I'm getting a plumber to fit the boiler and core central heating zones. I am fitting the bathroom, kitchen and radiators. I was planning to use PEX, but I am struggling with availability of...
Replies
6
Views
809
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock