Search the forum,

Discuss single or double ended socket soil pipe in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
910
Is it best to use a single or double ended socket when connecting on to an orange soil pipe to run an internal stack
 
If its going straight up I always try to glue a single socket 1st as low as poss,

prqx0026-zn.jpg


Then push one of these into that and work from there :D

prqx0154-zn.jpg


I'm not a fan of having pushfit double socket although it does work but I don't like the thought of it over time.
 
As above I always try to have a fitting right at ground level then work up from there
 
all depends on what is on the end of the soil pipe in the ground. socket or pipe :)
 
Status
Not open for further replies.

Reply to single or double ended socket soil pipe in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all, Have got an old 60/70s PVC soil stack, the Toilet is going into a Hunter branded socket which has an old O-ring design (quite flat with 3 or 4 ribs on it). It's painted in a fetching pink/purple colour in the photo. Tried to revive it with some grease before inserting a short length of...
Replies
2
Views
523
Hi , i'm new to this forum & would like some advice , i have an upstairs bathroom & was wondering if i could put a cloackroom loo downstairs , my worry is how do i connect to the existing soil pipe , or is it possible to dig under where the new loo will be in case the soil pipe runs along the...
Replies
22
Views
972
Hi, I've not posted for a while, not a plumber, but a keen DIYer who likes to try and do things without bodging if I can. Basically I'm wanting to create a cloakroom toilet in our utility room, theres already hot and cold feed so thats one job made slightly easier, thankfully. The problem I'm...
Replies
4
Views
291
D
Had a collapsed/cracked collar on the 90deg angled piece that my soil pipe sits in which is leaking water so has needed replacing. Access has been through the outside wall to inside as the soil pipe is internal and boxed in. Now I was expecting the plumber to fit a ‘rest bend’ but a 90 degree...
Replies
1
Views
567
Hi - I'm not an expert but wondered if anyone might be able to assist. I've replaced an old toilet with a new one. I've used the same water inlet pipe, and have just replaced the right angled soil pipe connecter (110 at toilet end to a 97-107 connector end to existing soil pipe). It's secured...
Replies
23
Views
1K
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock