Search the forum,

Discuss single cable electric ufh in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

PlumbBobBob

been asked as part of bathroom reno to supply electric underfloor heating. as it is an odd shape I was thinking of going for the single cable type rather than the ready made heading mat. anyone done single cable?
 
Yes much better than the mate stuff but needs elec testing at every stage to make sure not damaged

Vario pro all day long with there floor system as well

Had too many mats fail
 
Status
Not open for further replies.

Reply to single cable electric ufh in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have two adjoining cottages, each with an identical UFH system downstairs. Both been going fine for around five years. But for the last few weeks, one of the systems doesn't seem to be running most of the time. Essentially the UFH does "work", in that I can turn the thermostat right up, and...
Replies
1
Views
519
As part of deep house renovation, planning to install wet ufh on the ground floor, and radiators on upper floor. Two bathrooms will have both water based towel warmers and electric ufh, and need dual thermostat to separately control air temp (by running towel warmer) and floor temp. Need...
Replies
0
Views
603
We currently have the ground floor wet UFH and upstairs rads running from an unvented condensing boiler. Any advice/experience on the following please:- The 1st-floor and 2nd-floor landing will retain radiators but they will be added to the underfloor manifold as a single zone as it will...
Replies
0
Views
676
E
I reckon if I did a survey of 100 heating engineers, asking what would they recommend for heating a granny annexe being built onto the side of my house, in place of the garage, most would give me a suggestion to put in a) an extension to the existing boiler rad circuit & electric water heaters...
Replies
0
Views
225
eco-heating options
E
P
Hi, I'm after some advice on converting my current CH system to Wiser smart system. In particular, looking for advice on whether I can use the Wiser Hub without using Wiser's specialist Underfloor heating controller. Current set-up • System boiler (Vaillant ecoFIT pure 630) with unvented hot...
Replies
1
Views
1K
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock