Search the forum,

Shower tray former fixings wanted

Discuss Shower tray former fixings wanted in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
D

Deleted member 94038

I'm after some fixings for a Shower tray former. To be a little more precise it's the washers that I need that look like penny washers with extra holes around their outside edge. I'm in Kent and will travel to collect
 
Status
Not open for further replies.

Reply to Shower tray former fixings wanted in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

D
Void under shower tray former
Void under shower former My recently installed solid resin shower tray / wet room former has around 4mm flex across a dinner plate sized area in the middle. It's on a concrete base that was unevenly screeded over. The gap will likely be under 10mm. It has not yet been tanked or tiled but would...
Replies
5
Views
640
Ben-gee
B
J
What type of shower tray
Hi all. Sometime ago I removed our old 1200x800 shower tray and replaced with a Stone resin one. The stone resin tray was much, much heavier than the old one. At the time I didn't give much thought to it, but now I'm wondering which type of tray it would have been. Other than it weighed no more...
Replies
2
Views
422
Ben-gee
B
benj987345
Can anyone help an idiot diyer with a shower tray?
I've got an issue with the shower tray not being totally flat. As you can see from the photos, it is about 7mm out at one side. It's leaning towards the waste end though. The shower tray is pushed underneath the tiles. My mate did the tiling and I now realise that we should have put the shower...
Replies
5
Views
514
ShaunCorbs
ShaunCorbs
fango7
Shower tray hairline cracks
Hi all I have two hairline cracks around shower tray plug waste hole. Is this a concern ? I.e let water in etc through crack ? And any fixes or do I need a new tray? I also have suspicions that the tray was fitted without a cement or mortar bed underneath to support the tray and this is...
Replies
8
Views
1K
king of pipes
king of pipes
M
Oversize Shower Waste
I have bought a shower tray and it has an extra large hole for the waste trap. Its a cooke and lewis think its an eclips 1400 x 900 tray. The hole is 160mm and has a lip around it for the cap at 200mm. Cant seem to find one in the correct size, hope someone can help.
Replies
0
Views
491
MetalGodlee
M
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock