Search the forum,

Discuss Shower temperature issue in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Messages
1
I have a pump in the hot press which drives 2 showers in a non pressurized system. For 15 years we've used the bathroom shower without any issues and lately we've just got the ensuite up and running. Problem is the ensuite shower water starts hot and then goes Luke warm when it is running on its own. When I turn the bathroom shower on at the same time the ensuite shower then goes hot. The ensuite shower has been replaced but the same problem exists. Anybody got any ideas?
 

Reply to Shower temperature issue in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
157
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
218
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
289
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock