Search the forum,

Shower Tap Diverter Valve

Discuss Shower Tap Diverter Valve in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

D

diynewbie

Messages
1
Hi all, DIY rookie and have an issue with malfunctioning diverter valve - water currently flows through both tap and shower head regardless of diverter position. Had a look at the valve today and it appears that the upper thread just above the rubber washer is broken. Unsure of make/model of tap and was wondering if anyone had any helpful suggestions. No obvious damage to washer and have given it a proper clean, reattached etc and same issue. Feel like I probably just new a new valve but keen to explore all options as think it would be hard to source something similar and unkeen to change entire taps as the panelling on bath is a bit of a nightmare. Any help would be great. Cheers.
 

Attachments

  • image1.jpeg
    image1.jpeg
    42.9 KB · Views: 7
  • image2.jpeg
    image2.jpeg
    49.7 KB · Views: 6
  • image5.jpeg
    image5.jpeg
    33.2 KB · Views: 5
  • image6.jpeg
    image6.jpeg
    45.3 KB · Views: 5
  • IMG_4976.jpg
    IMG_4976.jpg
    38.3 KB · Views: 6
  • IMG_4977.jpg
    IMG_4977.jpg
    36 KB · Views: 5
  • IMG_4978.jpg
    IMG_4978.jpg
    40.9 KB · Views: 5
  • IMG_4979.jpg
    IMG_4979.jpg
    38.4 KB · Views: 5
  • IMG_4980.jpg
    IMG_4980.jpg
    36.4 KB · Views: 4

Reply to Shower Tap Diverter Valve in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
229
exedon2
exedon2
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
1
Views
75
Gasmk1
Gasmk1
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
0
Views
53
Splitty
S
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock