Shower door catching as hinge broken. Part number 1256A appears stamped on the hinge, but don't know make of shower door to be able to start tracking

[Kirkybingo]

 

[snowhead]

Showerpart Ltd - blocks - hooks - rubber stops

A wide range of replacement shower parts for straight or curved glass shower enclosures - free UK postage

www.showerpart.co.uk

 

[Kirkybingo]

Showerpart Ltd - blocks - hooks - rubber stops

A wide range of replacement shower parts for straight or curved glass shower enclosures - free UK postage

www.showerpart.co.uk

Showerpart Ltd - blocks - hooks - rubber stops

A wide range of replacement shower parts for straight or curved glass shower enclosures - free UK postage

www.showerpart.co.uk

I already tried you and you don't stick it, but do you know which make the shower door is please ?

 

[townfanjon]

Generally if the shower door is of a reputable manufacturer they would stamp their name on it , and hence you may be able to source their parts .
On that one , unless you are very lucky of course, its a new one you need .

Edit , door

 

[Cockneypool]

Did you manage to get one Kirkybingo? We have just had exactly the same problem

 

[Kirkybingo]

Did you manage to get one Kirkybingo? We have just had exactly the same problem

Regrettably not as I can't identify the manufacturer

 

[Milner99]

Hi All,
Had the same problem so I made a replacement and printed on my 3D printer.

Here's a .zip with the STL (3d file) and GCODE (3d Print file) for the hinge. I printed and fitted - works fine.

Hope this helps
Chris.

 

[Milner99]

I'll add this one I re-created in 3D is the top hinge. Bottom one of course is flipped sides - the STL should be able to be tweaked to make the bottom hinge if you need that one. OR if you get stuck, give us a nudge I can help I'm sure.

 

[scotty2hotty]

Hi All,
Had the same problem so I made a replacement and printed on my 3D printer.

Here's a .zip with the STL (3d file) and GCODE (3d Print file) for the hinge. I printed and fitted - works fine.

Hope this helps
Chris.

Hi Chris,

Just wanted to check that this was the top hinge? The image from the file is showing part number 1255A, not 1256A.

 

[Chris M]

Hi, yea top hinge. It printed fine, still holding today.

 

[scotty2hotty]

Hi, yea top hinge. It printed fine, still holding today.

Hi mate, fitted fine.

What material did you get it printed in?

Think mines was done in ABS and the pin just snapped this morning. About a month it lasted.

Cheers.

 

[Lou]

(Just bumping a few older threads, they will drop off what is new soon)

Check Out Plumbing News!