• Welcome to PlumbersForums.net - The international plumbing advice forum. Professional plumbers sharing advice with fellow plumbers and DIY alike. Register for free today!

Discuss Running UFH, cold, hot & gas pipes in the Water Underfloor Heating Installations area at PlumbersForums.net

Status
Not open for further replies.

Chalked

Plumber
GSR
Messages
4,935
Reaction score
2,280
If your dong th insulation yourself. It will need to minimum of 100mm.
You can get a sheet of 50mm and cut it into 100mm strips. Lay this either side of the pipework and cut another piece of 50mm insulation to bridge the pipework. Fill the rest in with 100mm and cover with visqueen.
Make sure all pipes are straight to make cutting easier.
And test everything
 
Status
Not open for further replies.

Forum Sponsors

Corgi - Plumbing Supplies for Professional Plumbers - Plumb Advice

Plumbase - Plumbing Parts for Plumbers - Plumbers Advice

Power Shower Booster for Power Showers - Plumbing Advice

Underflor Heating Systems by uHeat - Plumbing Advice

Wetroom Supplies by Wetroom Store

Nicobond - Wetroom and Tiling Supplies - Plumbers Installation Advice

Corgi - Plumbing Supplies for Professional Plumbers - Advice for Plumbers

Do you have a DAB radio for work?

  • Yes

  • No


Results are only viewable after voting.

Latest Plumbing Advice

Top Bottom