Search the forum,

Discuss Reverse circulation Solid Fuel in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
1
I have a Rayburn running my CH and HW, when the boiler is lit, the gravity flow works as it should rises to the cylinder and drops back to the boiler...when the cylinder is hot enough the CH pump comes on and this is where it goes wrong.

The pump seems to be pushing the cold radiator water up through the injector tee rather than going through it and pulling the return water from the cylinder to merge and then continue into the boiler. I've changed out the tee but the issue still continues.

I've drawn a quick sketch of how the system is piped. Their is also a heat leak rad in their but I've just not drawn it.

Any advise would be awesome.
 

Attachments

  • 16711826314996235626668949051044.jpg
    16711826314996235626668949051044.jpg
    230.8 KB · Views: 13

Reply to Reverse circulation Solid Fuel in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock