Discuss Returning to plumbing and heating - looking for a refresher... in the Central Heating Forum area at PlumbersForums.net

Messages
16
Reaction score
0
Hi all,

My name is Aaron, I completed a four-year apprenticeship after leaving school and attained my NVQ level 2 in plumbing and also completed, which was at the time, CORGI registration. After my training, I installed a number of boilers, full central heating systems and conversions. I was also part of a small-works team for a while, changing pumps, radiators etc...

However, after six years out on my own installing gas, I decided to see some of the world and ended up travelling/teaching abroad for nine years. In that time I also completed a Bachelor's degree in English.

I am now settled back into UK life and looking to reinvigorate my career. I am 34 years old and based in Kent. My question is do you think it viable I request six-months shadowing an engineer before being let loose by myself again? I am considering approaching some companies.

I know I can simply go and re-qualify with gas and start up alone but I would rather get my hands dirty and build my confidence back up before doing so.

Any advice about which way to go about this is highly appreciated.
 
Test4Less - PlumbersForums.net Sponsor
This official sponsor may provide discounts for members
B

Burger

Hello Aaron,

It sounds feasible what you’re asking, I would certainly try the work experience root to get your hands dirty and get back in the game.
 
Messages
2,083
Reaction score
496
Why dont you do British Gas or one of the big boiler manus they are screaming for experienced and will get your papers back up to date. Then dump them and head off on your own. Others will have their ideas I hope...let us know
what you decide...centralheatking
 
OP
A
Messages
16
Reaction score
0
Thanks for the replies, guys... I will start looking around and applying.
 

Millsy 82

Plumber
Gas Engineer
Messages
4,352
Reaction score
1,731
Chances are you wouldnt be able to just go and re sit your gas as you have to do that within a certain amount of time of them running out, so I would assume you would have to do initial again so would need to produce a portfolio.

Try phoning around but others may be different but round me its recently gone really quiet so companies may be a little reluctant to take someone on and pay for them to do their gas etc.
 
OP
A
Messages
16
Reaction score
0
Hi Millsy, I contacted a number of gas training companies and they said as I was CORGI registered before I could either sit the exams again or go through some training, though would not have to complete a portfolio (i would simply skip this part). I confirmed this with two other companies and both said the same. However, I have heard other say they needed a portfolio :)
 
Messages
306
Reaction score
158
My understanding of the accreditation process ( using Logic) is that once your qualification is more than 12 months out of date, you are required to take ACS as if you were doing it for the first time.
 

Matt0029

Gas Engineer
Messages
265
Reaction score
29
Why dont you do British Gas or one of the big boiler manus they are screaming for experienced and will get your papers back up to date. Then dump them and head off on your own. Others will have their ideas I hope...let us know
what you decide...centralheatking
Are big boiler manufacturers screaming out for engineers? Not seen much advertised.
 
uHeat Forum Sponsor - PlumbersForums.net
Plumbing Advice - Find Plumbers Jobs
Corgi Direct - Plumbers Forums Sponsor
Wetroom Store - PlumbersForums.net Sponsor
Test4Less PlumbersForums.net Sponsor
Plumbase - PlumbersForums.net Sponsor
Power Shower Booster - Official PlumbersForums.net Sponsor

Latest Plumbing Advice

Top Bottom