Search the forum,

Discuss Restricting Flow in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

tomhames

Hi there,

I am trying to find a way to reliably restrict the flow of a water system down to 3 litres an hour. the water is to be run through a water meter.

Anyone have any ideas,

Cheers,
Tom
 
Do you mean 3 l/hr or 3 l/min?

At 3 l/hr it would take nearly 2 hours to fill a bucket!

Talk to Reliance Water Controls (0800 389 5931) they do a range of flow regulating valves.
 
Do you mean 3 l/hr or 3 l/min?

At 3 l/hr it would take nearly 2 hours to fill a bucket!

Talk to Reliance Water Controls (0800 389 5931) they do a range of flow regulating valves.


Yes i do mean 3 l/hr, i know it sounds very odd, but we are testing water meter accuracy down to their lowest level.

Thanks, I will give them a try.
 
Status
Not open for further replies.

Reply to Restricting Flow in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
0
Views
53
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
276
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
186
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
301
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
1
Views
75
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock