Search the forum,

Rems Amigo 2 wanted

Discuss Rems Amigo 2 wanted in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
W

WHPES

Plumbers Arms member
Plumber
Gas Engineer
Messages
4,835
As in title, 240v or 110v, must be in decent nick.
 
Doesnt matter if thats missing as I have the one off my old Amigo which is just about pooped!
 
Status
Not open for further replies.

Reply to Rems Amigo 2 wanted in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

J
REMS Solar push or a KAMCO power flush unit HELP ME CHOOSE
Ive looked at the tech specs and it seems that the REMS has a lower flow rate but higher pressure at 5.5 bar. the Kamco has a higher flow rate so i understand that will be best for flushing a dirty system, however its maximum pressure of flow is under 2 bar. I wish to use a mashine for...
Replies
1
Views
943
oz-plumber
O
M
    • Like
Various equipment for sale
Hi all, thanks for letting me join. After a good few years of undertaking various commercial installations I have packed up for good in this sector. I now have a store full of equipment, that is now for sale. All of the items were bought for specific projects so have had light use only on that...
Replies
3
Views
1K
king of pipes
king of pipes
PtrJack
Getting a 1/2"pvc pipe to fit a 1/2"pvc coupling
I have seen people speaking of this and others not understanding. I have a leak in my pipe coming from the main. Attaching a new 1/2" coupling to the 1/2" pipe (blue pipe) is a problem as the coupling is larger than the pipe although both are 1/2". Most people do not realize that there are...
Replies
1
Views
261
Brambles
B
I
Viessmann 100-W System With Evohome
Morning, I have a job later this week with the above , Viessmann Vitodens System boiler. It has a 4 pipe setup with internal diverter and at present there is a wireless thermostat/programmer controller in the hallway. Customer wants a Honeywell Evohome System and I just wondered if I can wire...
Replies
4
Views
500
Ben-gee
B
Evapourized
I want to swap my electric shower to a power shower!
I want to swap my electric shower to a power shower. I have a 200 litre pressurised hot water tank in the loft (not a combi boiler) the hot side has a pump and decent flow, but the cold side/hot side has not got an equal pressure as the cold is just mains fed and would say the flow is below...
Replies
6
Views
786
Timmy D
T
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock