• Welcome to PlumbersForums.net - The international plumbing advice forum. Professional plumbers sharing advice with fellow plumbers and DIY alike. Register for free today!

Discuss Radiator TRV 15mm but radiators 22mm?? in the Central Heating Forum area at PlumbersForums.net

bob norfolk

New Member
Messages
5
Reaction score
0
hello, not a problem I’ve thought about before, but having an achp fitted so I need the maximum flow and return volume. However I find I can’t get 22mm TRV/ emitter valves only the standard 15mm. This seems bizarre due to the standard emitter Inlet/ outlet bore size. Will this cause much of a restriction to the low temp system?

Thanks
 

Gasmk1

GSR
Messages
1,138
Reaction score
327
you can get full bore trvs that are used on single pipe systems if thats what you need
 
OP
B

bob norfolk

New Member
Messages
5
Reaction score
0
Thanks. It’s mainly for the increase in pipe sizing due to the air source heat pumps lower temperatures. I’d be interested to know where you can get them as google doesn’t want to know? Cheers
 

ShaunCorbs

S. Mod
Plumber
GSR
Messages
23,296
Reaction score
6,258
What flow rate are the rads you will be less than 15mm I think so the issue will be the rads not the trv
 

Gasmk1

GSR
Messages
1,138
Reaction score
327
Danfoss RA-G15 angled valve 1/2" not cheap and you have to buy the heads as well they dont come complete
 

Forum Sponsors

Corgi - Plumbing Supplies for Professional Plumbers - Plumb Advice

Plumbase - Plumbing Parts for Plumbers - Plumbers Advice

Power Shower Booster for Power Showers - Plumbing Advice

Underflor Heating Systems by uHeat - Plumbing Advice

Wetroom Supplies by Wetroom Store

Nicobond - Wetroom and Tiling Supplies - Plumbers Installation Advice

Corgi - Plumbing Supplies for Professional Plumbers - Advice for Plumbers

Do you have a DAB radio for work?

  • Yes

  • No


Results are only viewable after voting.

Latest Plumbing Advice

Top Bottom