Search the forum,

Discuss Push fit soil pipes.. in the USA area at PlumbersForums.net

Messages
17
Does it matter if they aren’t fully inserted, as long as they go past sealing ring? I cut a bit of pipe 1-2cm too short and can’t get it out the other side to change!
 
should be fine aslong as theres no movement
 
As long as you de-burred the inside edge of the pipe you should be alright. If it's at all past the o-ring it shouldn't leak and if the pipe is deburred it shouldn't catch debris on the way through even if there is a small gap between pipe end and the stop inside the fitting.
 

Reply to Push fit soil pipes.. in the USA area at PlumbersForums.net

Similar plumbing topics

Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
201
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
195
  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
59
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock