Search the forum,

Potterton Suprima 50L update

Discuss Potterton Suprima 50L update in the Plumbing Jobs | The Job-board area at PlumbersForums.net

J

jrmroxx

Messages
21
Just thought I would update from previous post if anyone interested, above boiler had ignition fault, though I got up early and watch boiler until fault occurred right after some gurgling sounds so basically ran HW and CH for a couple of hours, never heard anymore noises and has had no faults since so I'm guessing air has managed to escape via vent . Happy days.
 
jrmroxx said:
Just thought I would update from previous post if anyone interested, above boiler had ignition fault, though I got up early and watch boiler until fault occurred right after some gurgling sounds so basically ran HW and CH for a couple of hours, never heard anymore noises and has had no faults since so I'm guessing air has managed to escape via vent . Happy days.
Click to expand...
Its good to get feed back some do some dont...centralheatking
 

Reply to Potterton Suprima 50L update in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

U
Y plan CH or HW suddenly not working
Hello. I've just replaced our old Potterton EP2 CH controller with a Drayton Wiser HubR (& peripherals). The old backing plate wasn't compatible with the new universal one, but the wiring was pretty close AFAICT (N, L, 1, 3 & 4 connected) .When I first powered it up but didn't have any TRVs...
Replies
1
Views
245
UserError
U
S
Boiler overpressure with Potterton Precision
Dear All New member here, coming looking for help. A few weeks ago I had work carried out by a British Gas Homecare service technician. It required a drain and refill of the system, and as he left, he advised my I would need to bleed all the radiators, at some point, given a few days, when...
Replies
14
Views
925
sutty600
S
S
Ideal Logic Combi 30 - pump only keeps activating for 4 mins.
Hi, As per the thread title, I have an Ideal Logic Combi 30 and I am having a problem with the pump, which keeps activating without any DHW/DCH. When the pump activates, it runs for exactly 4 minutes each time and this can happen as frequently as something like 5 times an hour or as...
Replies
2
Views
1K
SteveE63
S
C
    • Like
Grundfos Alpha Pump replacement
Hello, my Mothers heating failed in the recent UK cold snap. I found the pump was stuck. I have a question about pump orientation. The existing pump flows downwards. The manual for the proposed replacement recommends that it should pump upwards. This would involve rearranging the flow &...
Replies
8
Views
605
Clockdoc
C
G
Ideal Logic+ System cycling when no HW or C/H demand
Hi. I have an issue with my Ideal Logic+ System S24 boiler which I hope someone can help with. Below is as much detail as I can think of. The boiler has been running constantly (cycling?) 24/7 for the last few days, during the recent very cold snap and since. HW and C/H are running fine, as per...
Replies
4
Views
1K
Gazzo14
G
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock