Search the forum,

Post moderation

  • Thread starter Sarkduck
  • Start date
  • Replies 6
  • Views 3K

Discuss Post moderation in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

Sarkduck

All my posts have to be approved manually at the moment, have I not completed something or how long will this be for? Thanks
 
it is a new procedure that has been brought in to try and stop spammers. recently we have been getting rather a large amount of spammers from india, indonesia and other places which take time to remove. it is nothing you have or haven't done, every new member is having to get moderated manually.
 
how long is it before i am not 'new' because it just took about 4 hours for my posts to get published then. thanks
 
Sarkduck said:
how long is it before i am not 'new' because it just took about 4 hours for my posts to get published then. thanks
Click to expand...

When we decide whether we like you or not..........

You need to get your post count up. Don't fret. Life's too short.
 
it probably took four hours for your post to be published because there wasn't anyone available to do it any sooner.
 
steveb said:
it probably took four hours for your post to be published because there wasn't anyone available to do it any sooner.
Click to expand...

Yeh, gathered that much. Just meant I couldn't join in when the conversation was actually happening. Heh
 
Status
Not open for further replies.

Reply to Post moderation in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Dan
  • Sticky
Australia Morning Thread
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
60
Dan
Dan
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
203
Dave Moore
D
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
118
Stigster
Stigster
C
Mira shower mixer adjustment.
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
198
cheddarman
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock