Search the forum,

Discuss Polyplumb Stiffeners in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
2
Bought a Polyplumb 22mm Spigot Elbow (PB1022) today, I intend fitting the male section into another Polyplumb fitting. I normally use the black pipe stiffeners (PB6422) however they don’t fit into the male section of the spigot.
My question is simple is there a different stiffener type for the spigot fitting or is it not necessary to fit one at all ??.
Strangely many of the pictures on the inter web appear to show what appears to be a metal stiffener which is odd.
Advise would be appreciated
 
Are you sure it’s Polyplumb pipe?

I don’t do much plastic but think Hepworth pipe (Hep20?) pipe grey too.

No idea if they are compatible.
 
Should come pre done / ready for fitting
 
As already stated but just to confirm, no insert/stiffener needed in the male side of the fitting as it is already rigid enough without the extra insert support.
 

Reply to Polyplumb Stiffeners in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock