plastic pipe - o ring replacement

[joeblow47]

Hi

I want to replace the silicone/rubber o rings on my washing mashine outlet flowpipe arrangment.

See pics of the two ring types and what looks like a rubber sleeve

Could someone:-
1. Tell me the generic size AND names of the o-ring, wider seal ring and rubber sleeve i need to buy ?
2. If possible could someone link me to a cheap retail outlet online - ebay or whatever...?

Cheers - appreciated
sp

 

[ShaunCorbs]

https://www.NoLinkingToThis/p/mcalpine-tubular-p-trap-white-40mm/75915

Rob the oring and outlet seal

 

[Deleted member 120897]

The generic size is referred to as 1.5”, you might be able to use one of these: FloPlast 40mm Replacement Trap Seal 4 Pcs - https://www.NoLinkingToThis/p/floplast-40mm-replacement-trap-seal-4-pcs/40512?tc=MC6&ds_kid=92700055281954514&ds_rl=1249404&gclid=Cj0KCQjw5JSLBhCxARIsAHgO2Sc-p1ufn4pTp149xvHU3m76ruS-hqtR93XimKeT1fgpcsLUN889Uf8aAs-yEALw_wcB&gclsrc=aw.ds

 

[joeblow47]

Thanks for the leads for the 2 types of washers - that's very helpful

In the pic with the wider tapering washer, it's sitting on a thin black rubber sleeve - does this sleeve have a name and generic size too ?

cheers
sp