Search the forum,

Discuss Pipe blown off mega flow cylinder due to pressure? in the Make a suggestion about the forum in general area at PlumbersForums.net

Messages
1
Hi, Two days ago we noticed we had no hot water. We have a mega flow tank/cylinder in our airing cupboard. It appeared that the lack of hot water could not be solved by setting the motorized valve to 'manual' so as to open the valve to allow heated water 'in' having been heated from the boiler.Boiler works fine. So we turned on the immersion heater. Water heated ok. This morning on checking the source of a loud bang from the airing cupboard the cause was that the cold water 'in' pipe had blown off the relevant connection at the base of the mega flow tank.Hardly any water spilled out.stopcock in cupboard now turn to 'off'. The mega flow tank was installed by the house builder 2004. Have any of you out there come across this type of issue with mega flow tanks before?
 
Been serviced no doubt?? Never prop open a valve with an unvented. They fail to closed
 

Reply to Pipe blown off mega flow cylinder due to pressure? in the Make a suggestion about the forum in general area at PlumbersForums.net

Creating content since 2001. Untold Media.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock