Search the forum,

Discuss One of our VIP has asked a WB question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Rob Foster

Esteemed
Messages
2,083
He knows about GSR ...no brail card but thats ok. What is criteria regarding fitting WB is it essential to be a wb registered fitter to get the guarantee ?
or can anybody GSR fit them ?
Its brand new as off 1 month ago but not yet signed off.
centralheatking
 
Yep anyone can fit and get a 5 year warranty 6 on an offer depending on the boiler model

Wb Filter adds another year
 
Its a wb cdi 35 classic and he
he reports a constant droning noise all the time even when not being called for heat or hot water and in fact when is called on the noise persists. As you might imagine sleeping in the bedroom above the installation
noise is the last thing a blind person needs at night because their hearing sense is heightened. Any ideas...I thought it might be to do with the gas air mixture.
many thanks Centralheatking
 
Water pre heat turn eco on see if that sorts it out
 
Wb attended changed the board and the pump and re set the gas air mixture on a brand new boiler. No profit there then
centralheatking... our Vip had a
totally sound (pun) nights sleep
thanks for your input
 

Reply to One of our VIP has asked a WB question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
170
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
300
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
179
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
6
Views
143
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
228
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock