Search the forum,

Discuss Old house garden water supply in the USA area at PlumbersForums.net

Messages
9
Hi I've recently moved to a garden maisonette which does not have a garden tap. I had a little poking around in the garden and found a small pipe coming out of the back of the house. After moving the square end around with a pair of pliers it turns out that's the water supply. Does it seem that there is an easy way I can connect a garden tap to existing thread? I would really appreciate any help.
 

Attachments

  • IMG_20210308_172136.jpg
    IMG_20210308_172136.jpg
    385 KB · Views: 7
  • IMG_20210308_172139.jpg
    IMG_20210308_172139.jpg
    318.7 KB · Views: 7
  • IMG_20210308_172147.jpg
    IMG_20210308_172147.jpg
    401.9 KB · Views: 7
Agree with the above it’s for your heating system
 
Where’s the closest mains water tap you know ?
 

Reply to Old house garden water supply in the USA area at PlumbersForums.net

Similar plumbing topics

I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
201
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
5
Views
123
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
5
Views
117
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
105
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
249
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock