Search the forum,

Discuss Not really a plumbing question in the USA area at PlumbersForums.net

Murdoch

Esteemed
Res.Electrician
Messages
1,126
Just been to look at a job where the homeowner is wanting to convert their big under stairs cupboard into a cloakroom - electrically ok

but the gas meter will be next to the toilet , sideways on meaning reading the meter may be impossible

this is really for my interest, but are there any rules about access to gas meters?

thanks
 
Just been to look at a job where the homeowner is wanting to convert their big under stairs cupboard into a cloakroom - electrically ok

but the gas meter will be next to the toilet , sideways on meaning reading the meter may be impossible

this is really for my interest, but are there any rules about access to gas meters?

thanks
only way i can read mine is with a smart phone on a selfey stick. meter reader not complained as yet
 
Just been to look at a job where the homeowner is wanting to convert their big under stairs cupboard into a cloakroom - electrically ok

but the gas meter will be next to the toilet , sideways on meaning reading the meter may be impossible

this is really for my interest, but are there any rules about access to gas meters?

thanks
Meters should be positioned away from corrosive environments, e.g. wet floors, damp places such as beneath sinks/basins. They shouldn't be installed in a bathroom.
They shouldn't be in a position where they can suffer accidental damage.
They should not be installed where food, bleach and detergents are stored.
In a building with two or more floors, they must not be installed under a stairway where the staircase is the only means of fire escape.
In a house with one floor above the meter, where the only means of fire escape is the staircase that the meter is under, the meter should be of fire resistant construction or, be housed in a compartment made from 1/2 hour fire resistant material.
Those are the most relevant to you I think. There are more though.
 
I would not be comfortable about having no access to it , it may well need maintenance carried out on the pipework or the meter itself and in a emergency you need to be able to switch it off at the emergency control valve , can it not be moved to a external wall contact cadent for advice . Regards kop
 

Attachments

  • inCollage_20200822_085218389.jpg
    inCollage_20200822_085218389.jpg
    133.7 KB · Views: 5
  • inCollage_20200822_085228383.jpg
    inCollage_20200822_085228383.jpg
    124.6 KB · Views: 4
  • inCollage_20200822_085238157.jpg
    inCollage_20200822_085238157.jpg
    81.7 KB · Views: 4

Reply to Not really a plumbing question in the USA area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
4
Views
387
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
166
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
217
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock