Search the forum,

Discuss Noisy boiler (Rubbish Ferroli HE18) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
2
I have probably one of the worst boilers you could have (not my fault, blame the home developer!)

It's a Ferroli Optimax HE18s.
We are getting a really loud vibrating noise when the hot water comes on.

But if I switch the boiler off then on again and stops straight away and carries on like nothing has happened.
Anyone have any ideas?
 
You will likely need a gas safe engineer out to have a look but I really wouldn’t be throwing any money at that boiler
 
Don’t know the boiler but size suggests it’s system boiler so to me it should have the same issue doing central heating if not then it’s more likely to be something external
 
Possibly, I've recently changed my water to come on 2 times throughout the day and not sure if it's a coincidence but it seems to happen when the water comes on. It did happen to from time to time when it was on constant so was never sure if it was the heating kicking in or not? However, it still is only every now and then it happens and not every time the water comes on?
 
I have probably one of the worst boilers you could have (not my fault, blame the home developer!)

It's a Ferroli Optimax HE18s.
We are getting a really loud vibrating noise when the hot water comes on.

But if I switch the boiler off then on again and stops straight away and carries on like nothing has happened.
Anyone have any ideas?
Ferroli are terrible boilers. I bought a new build few years back and they had fitted them in there good luck
 
Like everything else you get what you pay for, they’re a budget boiler and I once went to a noisy ferroli and when contacting technical they suggested that there wasn’t any or enough inhibitor in system, added inhibitor and no complaint after
 

Reply to Noisy boiler (Rubbish Ferroli HE18) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
212
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
232
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
0
Views
53
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
224
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
302
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock