Search the forum,

Discuss Noise coming from sprinkler valve in the DIY Plumbing Forum area at PlumbersForums.net

Messages
1
9-21-22



Hi All: I have always appreciated your comments and troubleshooting recommendations. If I may ask for your thoughts on the following:

I have and older Orbit WaterMaster valve. Please see attached photo. I have 4 of these valves in the manifold. I have replaced the diaphragm on all 4 valves with Part Number 57045. I believe the model # of the valve is 57100 or 57101 and is a 1 inch valve. After replacing the diaphragm on zone three and turned on the water system, I heard a humming/buzzing type of noise coming from that number 3 valve. That particular sound was not coming from any of the other 3 valves. Please note that the noise I hear is very hard to describe. But whenever I replaced a diaphragm it seems that I hear that type of noise. Perhaps some of you may know of this sound.

Anyway, I removed the valve cover and diaphragm from zone three and zone one. I placed the valve cover and diaphragm from zone one onto Zone three and visa versa. I did not hear that particular noise from zone one but did continue to hear the nose coming from zone 3.

Any assistance or thoughts will be appreciated.

Thank you so much in advance.
 

Attachments

  • valve.JPG
    valve.JPG
    491.7 KB · Views: 4

Reply to Noise coming from sprinkler valve in the DIY Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
227
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
211
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
214
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
218
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
278
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock