Search the forum,

Discuss New tail for old Peglers Radiator Valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
2
I need to replace a radiator, one of the valves is a Peglers B.S 2767 the tail in the old Rad is proving very difficult to remove can you still get tails for these valves? As replacing the valve will involve a lot of work I have a Wicks 15mm x 1/2" valve but the treads appear to be different.
 
I need to replace a radiator, one of the valves is a Peglers B.S 2767 the tail in the old Rad is proving very difficult to remove can you still get tails for these valves? As replacing the valve will involve a lot of work I have a Wicks 15mm x 1/2" valve but the treads appear to be different.

Hi Brad,
Is it large tail valve with 3/4” nut?
A photo would be good.
It should come out if you have proper ratchet radiator valve tool.
 

Reply to New tail for old Peglers Radiator Valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock