Search the forum,

Need help identifying radiator valve

Discuss Need help identifying radiator valve in the USA area at PlumbersForums.net

M

mrpcpearson

Messages
5
Is anyone able to identify this radiator valve please? I would like to source a replacement valve cap/knob (whatever the correct term is)

Thanks in advance.
 

Attachments

  • 20210811_193802.jpg
    20210811_193802.jpg
    234 KB · Views: 17
exedon2 said:
Very old Danfoss has a clamp and screw to fix head on. New heads available but pricey
Click to expand...
Looking on Amazon there are a number of head options.

013G5023 and 013G6040 appear to be for newer valves but this one which is described as being for old ra/vl 26mm bodies:
Danfoss - Thermostatic head for old Danfoss RA / VL 26mm bodies


Does this seem right?
 
And it works ? Eg turns off at set temp ?
 
ShaunCorbs said:
And it works ? Eg turns off at set temp ?
Click to expand...
It seems to be working perfectly :)

I actually purchased the head recommended above but it didn't fit. I contacted that company and provided the naked valve photo and they advised me which head to purchase. Just gotta return the first one.

I updated this thread so anyone searching for a solution to the same problem would find the solution.
 

Reply to Need help identifying radiator valve in the USA area at PlumbersForums.net

Similar plumbing topics

D
UK Can't get stopcock 100% closed to allow a tap repair
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
216
Chuck
C
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
176
exedon2
exedon2
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
256
Chuck
C
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
207
Firefox
F
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
118
Stigster
Stigster
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock