Search the forum,

Myson Actuator Issues

Discuss Myson Actuator Issues in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
R

Robaxter02

Hi,

I have UFH heating downstairs installed new just over 2 yrs ago but I think one of my actuators isn't working. When the stat is turned on the red indicator doesn't lift so I'm thinking the actuator is damaged. The flow meter is working for the room when you remove the actuator but something's just not right. Currently it's way too warm sitting at around 25deg. Is this a simple actuator change out? Is there any way I can check to see if there is any other problems? All other rooms work fine. The system is on a 10 way manifold of each of the zones and the pump is working fine when I adjust the room stat.
 
The actuators are fairly cheap, so first port if call, would be change it. After that, it could be the valve passing. Removal and a clean should sort that.
 
Hi Robaxter02,

you are correct, looks like an actuator is gone.
The reason why there's so warm now in that room is because there's no actuator to restrict the flow to that circuit.
Please let me see the photo of your manifold and I'll see if I can supply an actoatur for you.
 
Thanks Guys,

I appreciate the feedback. I've actually ordered an actuator (24v) to suit my system but thanks for the offer Wojtek. I'll let you know if I manage to get it fixed.
 
Thanks Guys,

I appreciate the feedback. I've actually ordered an actuator (24v) to suit my system but thanks for the offer Wojtek. I'll let you know if I manage to get it fixed.
 
Status
Not open for further replies.

Reply to Myson Actuator Issues in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Kolash
Faulty actuators or valves?
Hi I have a 4 zone / 7 loop UFH system. 2 zones (4 loops) always get hot when the system is on when the zone thermostats and actuators are off. The video posted shows when I turn on another zones the flow meters drop. (Kitchen prep and kitchen TV are the issue, two at either end of the...
Replies
14
Views
1K
Kolash
Kolash
D
Wet underfloor heat not coming on in any zone
We have UFH throughout downstairs. I have had one coil replaced. I have had the thermostats checked that they are linking to the correct actuators, which they are. the cupboard where the UFH system is gets hot when I turn up the thermostats in one or all zones. The boiler is coming on but the...
Replies
8
Views
573
SimonG
SimonG
H
Underfloor heating loop not raising floor temperature
I'm attending a wet underfloor heating system, it's an old one ..No flow meters, just adjustable valves on the returns with conventional actuators. Problem is , one loop (far right in photo) isn't heating the floor (timber suspended) . I've bled the loop via a hosepipe, shut off all the other...
Replies
3
Views
500
cjg
C
H
Zone Problems with Boiler
I have an older gas boiler HW heating system with a taco circulator pump for each zone that worked fine last season. When turning it on for the 1st time this season I found a problem with the boiler not running on one of the zones. If I turn on the heat to zone 1 I hear the system...
Replies
4
Views
425
John.g
J
B
No power to Manifold
Hi folks, hoping someone can help with a problem that's been perplexing me since just before Christmas..... I have a wet underfloor heating system installed in 2003 and manufactured by Underfloor Direct in NI - Now out of business. It's one of their triple tube systems and hasn't given me much...
Replies
19
Views
1K
Bradders123
B
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock