Search the forum,

Discuss Mixer tap cartridge advice please in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
2
Hi, I’m looking for a replacement cartridge for the one below . Is it a standard fitting or is it likely to have been discontinued? Tap us about 18 years old ( Blanco daras)
88BB56A2-D654-42CC-A02A-5EE5C13A7EFC.jpeg
87677DFB-0EA7-4547-B8DB-8B00DEEC9AA9.jpeg
 
35mm dia ?
 
https://www.NoLinkingToThis/p/flomasta-35mm-ceramic-tap-cartridge/6086x
 

Reply to Mixer tap cartridge advice please in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Hi, I can’t get one cartridge to budge when trying to replace in a mixer tap. The hot side cartridge was tight but removed with wrench comfortably, but cold side is so tight Ive burred the nut on the cartridge. Any advice on how else to remove the cartridge without damaging the mixer tap is...
Replies
7
Views
799
Hi, My Blanco Kitchen Tap Model Swift BM1420 is leaking. Please see attached photos for details of where water leaks from. What I've done so far. I replaced the cartridge. Leak persisted. Bought some replacement seals and tried to put in place of the old ones. Here's what I did next. Remove...
Replies
2
Views
185
Hi all. Just had a neighbour knock the door regarding a water hammer issue. My own house developed this issue sometime last year as well which is when the neighbours roughly started. Severn Trent were doing bits and bobs out in the street back then but this is probably a coincidence. Our water...
Replies
2
Views
376
I am trying to replace the cartridge for a waterfall tap (mixer mono) for the bathroom sink, I have run into a problem whereby I cannot remove the cartridge as the usual 32mm nut is recessed and I cannot get to it. The tap is from screwfix ( NIAGARA WATERFALL BASIN MONO MIXER TAP) I have...
Replies
3
Views
876
I need to replace the washer of my kitchen mixer tap as it is leaking. I was able to remove the spout once by unscrewing the screw on the back of the tap. However now I can't remove it again as it seems I must have used the wrong screw head and have rounded off the head. Please see attached...
Replies
9
Views
376
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock