Search the forum,

Discuss Mira select ev shower in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

64degrees

Gas Engineer
Messages
48
Got a customer with Mira Select exposed valve shower - cartridge shot and replacement over £150 so may as well replace. Seen that a new Select EV over £300, any ideas on a cheaper alternative ?
Cust reckons the pipe centres 150mm, don’t want to leave holes on tile when swap it out, standard bar won’t suit.
 

Attachments

  • 79F670F2-71C7-4F4D-92F7-BCFD2F8B7738.jpeg
    79F670F2-71C7-4F4D-92F7-BCFD2F8B7738.jpeg
    58.7 KB · Views: 3
If it's Mira I suspect your pipe centres will be 153mm not 150 which will cause you an issue.

You can get a Mira Element at Screwfix for 200+VAT

 
If it's Mira I suspect your pipe centres will be 153mm not 150 which will cause you an issue.

You can get a Mira Element at Screwfix for 200+VAT

Thanks for this, haven’t seen been to the job, had a vague memory the centres were off. Thought they were closer tbh.
Appreciated
 

Reply to Mira select ev shower in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock