M
minty88
Hi all,
I have just installed a Mira Miniduo EV mixer shower and have encountered the following issue:
1. When you first turn on the water flow, it starts fine and then within 3 seconds, all water flow ceases.
2. You then have to turn the shower off and on again and then the water flow remains constant
3. At this point a squealing noise is emitted for a few seconds and then stops
4. My system is unvented and as part of the installation, the 'plumber' said he had 'increased the inlet pressure'.
My questions are as follows:
1. Is this a problem with the shower valve and so should I return it?
2. Is increasing the inlet pressure advisable?
Many thanks for your assistance.
Ron
I have just installed a Mira Miniduo EV mixer shower and have encountered the following issue:
1. When you first turn on the water flow, it starts fine and then within 3 seconds, all water flow ceases.
2. You then have to turn the shower off and on again and then the water flow remains constant
3. At this point a squealing noise is emitted for a few seconds and then stops
4. My system is unvented and as part of the installation, the 'plumber' said he had 'increased the inlet pressure'.
My questions are as follows:
1. Is this a problem with the shower valve and so should I return it?
2. Is increasing the inlet pressure advisable?
Many thanks for your assistance.
Ron