Search the forum,

Discuss Michael jackson documentary in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Harvest Fields

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
10,444
Just putting this out there. Did anyone see that Jackson Documentary last night?
 
watched some of it very disturbing or quite unbelievable it goes both ways a lot of people on social media are not convinced.
 
Yes, I watched it. Normally wouldn’t be much interested, but it turned out to be good viewing.
Very sad I thought.
 
I watched most of it and was left amazed that there are people who could be naive enough to leave their kids to share a bedroom with MJ for weeks on end. WTF? There are squirrels in my garden that are not that stupid or negligent.

Yes because of his wealth and status! I turned the documentary off because something just don’t ring true with those guys, plus MJs already been found not guilty. I say first shut down the whole Catholic institution! Can the Pope Damning moonwalk? No he can’t.
 
Yes because of his wealth and status! I turned the documentary off because something just don’t ring true with those guys, plus MJs already been found not guilty. I say first shut down the whole Catholic institution! Can the Pope ****ing moonwalk? No he can’t.

Yet another dead s0d the media can attack. Tis ver canavalistic to me. The very people who created him turn on him and devour his reputation. (puking emoji)

He was not right at all, but it was never 'his' fault as he was doomed by his father as soon as he sung.

Just my 2 penneth ;)
 

Reply to Michael jackson documentary in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I have just looked back through the regs this seems to have changed and it isn't mentioned now. It now mentions if at high level it should be discharged...
Replies
11
Views
224
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one ....just easy to use and reliable. The fluke 115 looks good but its above my budget. My current socket and see one was great but it's developed a fault.
Replies
7
Views
205
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
227
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
129
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes a squeak noise as I turn it on or off, left tap is 100% perfect and noiseless. This grohe tap is like one unit, so no screw notch or way I can remove...
Replies
1
Views
41
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock