Search the forum,

Discuss MEXICO SUPER 3 CF 100 spares ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
14
Hi, has anyone got a broken MEXICO SUPER 3 CF 100, or spares ?
I'd like to buy the combustion chamber as mine has developed a hole,
Thank you !
 
Okayyyy

How do you know this?

You cant be sticking second hand parts in a boiler, surely?

Also; if you engineer has said it needs one, they're fitting it etc so perhaps go with their recommendations as to where get one from?

I'm not getting good vibes from this thread lol

Help us help you. Hopefully it's all above board. :)
 
Hi, has anyone got a broken MEXICO SUPER 3 CF 100, or spares ?
I'd like to buy the combustion chamber as mine has developed a hole,
Thank you !
Its very rare to find anybody that deals in random boiler spare parts basically as it is a legally restricted market...GSR etc...Ignite Heat Spares do re manufacture many parts
for older boilers but only MES parts. Ok Dan ....centralheatking
 
clutcjing at straws arent most parts obsolete for this boiler its also conventional flue so not particulary fuel efficient. even if you can get one the cost to change wont be cheap these say they have one but as i said not cheap DHS Spares, buy now at dhsspares.co.uk ÂŁ700.00
 
And there's no nearer external wall?

You have a boiler 12 meters deep into a building..?

Don't think I've ever seen that.

That said I'm not a plumber!
 
if you want to use the flue there are some condensing boilers that do viessmann are one. i assume if its 12 metres to chimney top its in the basement so unless the basement is totally below ground then you should be able to use an outside wall
 
Viessmann do a glue kit that allows you upto 12.5m of chimney so aslong as it’s less than that your fine

100 series is the mid range
200 series it the best of the best
 
cheers guys, yes the boiler is in the cellar without an external wall, and the current flue goes into the chimney from the ground floor. The boiler is next to the HW, CH and U/F heating inputs so can't really be moved.
Thanks for the tip about the 12.5m Viessmann flue kit, it must have a large fan.

But you can probably see why it's much easier to replace the combustion chamber.
OR (and please be gentle with responses!) the hole in it is 8mm - could a steel plate be welded onto it ?
 
If you already have 1 hole in the combustion chamber, how many more are on their way.

When things like that start to happen it really is time to replace the boiler - as difficult as it may seem.
 
cheers guys, yes the boiler is in the cellar without an external wall, and the current flue goes into the chimney from the ground floor. The boiler is next to the HW, CH and U/F heating inputs so can't really be moved.
Thanks for the tip about the 12.5m Viessmann flue kit, it must have a large fan.

But you can probably see why it's much easier to replace the combustion chamber.
OR (and please be gentle with responses!) the hole in it is 8mm - could a steel plate be welded onto it ?
but is it all below ground
 

Reply to MEXICO SUPER 3 CF 100 spares ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all. Not sure if it's a plumbers job or another trade but thought I'd ask. I am installing a new toilet downstairs next to an outside wall. There is a 3 way inspection/access chamber about 1.5 metres outside this point which I plan on going into. It has one inlet in use from the upstairs WC...
Replies
0
Views
114
Hi Everyone. I am looking for the 'Collector hood and Cleanout cover' for a Ideal Mexico super slimline CF 475. Or would a similar model number have the same hood and cover ? If anyone knows. Many thanks Tre Chen
Replies
0
Views
667
My parents are having a great deal of trouble with their Daryl Hydra shower due to this little plastic part being broken. It's the temperature spline - part number 204292, now discontinued. Has anyone had any luck finding anything that works as an alternative/3D printing a part (or by...
Replies
3
Views
646
C
Hi all, After trying to solve my boiler problem via YouTube as my usual plumber wasn't available, I have stupidly dropped Grundfos bleed screw below the boiler and it has fallen through a gap which is inaccessible. Is there anywhere I can buy spares for this part only or someone who could...
Replies
2
Views
696
Hi all, I'm trying to source a replacement pump for my heating system, I suspect the current pump is an older version that has been superseded, could anyone advise what the latest model would be or an equivelant? Wilo Type: RS25/6-3 P No: 4511050 Any help would be greatly appreciated :) Thanks
Replies
4
Views
427
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock