Search the forum,

Discuss Meter Query - BK G10E in the Gas Engineers Forum area at PlumbersForums.net

Sfc

Messages
61
Evening Guys, Trying to suss out whats needed for a job in a small warehouse unit (Customer wants a combi & 3 rads installed)

The current Gas meter is a BK G10E - Am i right in thinking this is a Commercial meter? if so would it specifically need a commercial boiler?

Thanks for any input.
 
Need a commercial ticket to install anything on that meter
 
Hi Shaun cheers for that, I’ll get in touch with someone I know who has the commercial tickets. Does this affect the type of boiler we’re able to put in? Cheers

nope but be aware that the warranty might not cover a commercial environment just double check
 
I thought domestic allowed up to:
U16 meter
35mm pipework
70Kw demand

I've not seen a installation volume quoted, also seem to remember something about if there is an AECV that's under 35mm you could work on systems down stream of that.
Agree it's also down to semantics any meter I fitted larger than u6 when I was at BG on the meter van had a valve on the outlet so in effect you can section off test meter then test pipework keeping volume under.
 

Reply to Meter Query - BK G10E in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
347
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
271
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
208
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
296
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
4
Views
203
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock