Discuss Marley push fit 15 mm any good? in the USA area at PlumbersForums.net
Reply to Marley push fit 15 mm any good? in the USA area at PlumbersForums.net
Similar plumbing topics
In the photo there is a grey 32mm push fit elbow between the sink trap and down pipe. I want to replace the elbow with a "male" push fit tee attached to an air admittance valve to stop gurgling noises.
I can't find a tee fitting that description, can anybody offer a solution as you can see space...
Hi, I'm trying to replace a motorhome tap and have come across these push fittings which don't seem to have any movement to enable uncoupling.
Does anyone know if these are uncoupleable and if so, how?
TIA.
Hello,
I have a troublesome fixed 15mm copper pipe with isolation valve going to my toilet fill valve. It's too tight for a Flexi hose. Can I use a push fit tap connector instead which will give me more flexibility in fitting?
Hi all, I am trying to find an alternative flush valve to fit the cradle of a ideal standard push btn flush.
It is all tiled in and changing to a Siamp or fluidmaster is not an option anyone have any ideas
Thanks
Home central heating in 10mm plastic then via a push fit connector to 10mm copper feeding the radiator.
Is it possible to get the copper pipe out of the fitting or is the coupling a one time use design.
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
- Started by FozzieBear
- Replies: 3
-
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
- Started by boiler101
- Replies: 4
-
Hole in copper pipe, solder under floor, T coupling & protection- Started by dreikher
- Replies: 0
-
-
-
-
-
-
-
-
-
Sewer pipe problems not sure about it- Started by sammie81116
- Replies: 3
-
-
-