• Welcome to PlumbersForums.net - The international plumbing advice forum. Professional plumbers sharing advice with fellow plumbers and DIY alike. Register for free today!

Discuss Manifold identification in the Water Underfloor Heating Installations area at PlumbersForums.net

Status
Not open for further replies.

[email protected]

New Member
Messages
2
Reaction score
0
Hi guy.

Was as wondering if anyone can help identify this underfloor heating manifold. I need to replace some on the valve bodies as they are sticking closed or passing. Hope the pictures have attached. If anyone can identify and provide a link to the correct parts that would be great.

Thanks.
 

Attachments

Messages
43
Reaction score
24
Hi [email protected],

I don't recognise the brand of the manifold I'm afraid.
It's not very easy to find right pin valve as they might have a different foot/plunger at the bottom, or different thread pitch and the whole valve lenght could be different.
If you would have a chance to remove one and post it to me I can compare it with the ones we've got in stock.

Thank you
 
Status
Not open for further replies.

Forum Sponsors

Corgi - Plumbing Supplies for Professional Plumbers - Plumb Advice

Plumbase - Plumbing Parts for Plumbers - Plumbers Advice

Power Shower Booster for Power Showers - Plumbing Advice

Underflor Heating Systems by uHeat - Plumbing Advice

Wetroom Supplies by Wetroom Store

Nicobond - Wetroom and Tiling Supplies - Plumbers Installation Advice

Corgi - Plumbing Supplies for Professional Plumbers - Advice for Plumbers

Do you have a DAB radio for work?

  • Yes

  • No


Results are only viewable after voting.

Latest Plumbing Advice

Top Bottom