Search the forum,

Discuss Macerator - for toilet, basin, sink and washing machine? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
11
Hi,

does anybody know any specific models that can deal with the toilet, basin, sink and washing machine?

I've read contrasting things online, so more confused than ever now.
 
Where all of those could be used at the same time you will need a mini lifting/ pumping station.
 

Reply to Macerator - for toilet, basin, sink and washing machine? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Hi, We have noticed for a while now that when our washing machine nears the end of a cycle we get a bad smell of dirty water in the downstairs toilet which is next door. We have moved the washing machine as we are having floor tiles put down and have noticed that the waste pipe is full of dark...
Replies
3
Views
217
J
Hi, I've installed a macerator a while ago to manufactures specs, toilet, sink and shower. One problem I've always had is the shower tray is slow to empty and has over flowed a couple of times.To get around this if I run the sink tap at the same time all works fine and the shower tray does work...
Replies
3
Views
512
I’m about to embark on a new listed building restoration project. There are seven bedrooms and three bathrooms, one of which in downstairs so not very convenient. I’ll be looking to sell on once completed and people basically expect a bathroom per bedroom these days 🙄 so need to get creative. As...
Replies
3
Views
266
Hello. I am planning to build a small half bath in my garage, next to a washing machine, using old showers plumbing. There was a stand-alone shower in the garage which has been removed. Unfortunately the pipes are only 1.5" on that side of the house since there's no bathroom and the house is...
Replies
0
Views
283
Hi, I have just moved the washing machine into the garage and it will not drain. I wonder if it's something to do with the way I have installed the waste? The washing machine is only a month old and was working fine this morning before re-positioned. I put an 1100mm hoorizontal run at around...
Replies
6
Views
999
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock